Gear Flow Dividers

MTO (Aluminum Housing):

2 to 12 section divider.  Flow Rate: 0.4 gal/min. to 16 gal/min per section.  Working Pressure: up to 3625 psi.  The chamber inlets are interconnected internally. Every second chamber has an inlet junction to enable connection according to flow rate and dynamic pressure.  Version “A” has a combined pressure relief valve and pre-fill valve incorporated directly in the housing for each section.

MTO (Cast Iron Housing):

2 to 12 section divider.  Flow Rate: 3 gal/min. to 58 gal/min per section.  Working Pressure: up to 3900 psi.  Robust cast iron housing. Manifold block for end position damping, with pressure relief valve, pre-fill valve and test fittings for each section.