Hydraulic Accessories

The butterfly valve is a component designed to save time for the technician working on the hydraulic system by not having to drain the reservoir. The valve is designed for low pressure hydraulic lines up to 230 psi and can be installed into the pump suction line or mounted directly on to the hydraulic reservoir for example. The maximum pressure differential on either side of the valve should not exceed 58 psi when the valve is closed.  Furthermore, when equipped with a limit switch, the operator can remotely see the open or closed status of the valve. Also, the thin profile and SAE flange makes it easy to design into the hydraulic circuit. The valve can be actuated with or without the shift handle and locked in to place with the automatic locking bolt. Available options: Reservoir Flange, Limit Switch and Threaded Adapter Bushing Inserts.

Product Catalogs:

HydroWer Butterfly Valves 1
HydroWer Butterfly Valves 2

The HydroWer Rubber Compensator is a product that qualifies as one of the best kept secrets of power unit accessories. The compensators are flexible connectors with SAE or DIN flanges that correct pipe alignment problems. They also provide a benefit with damping of vibrations, noises and movements in axial and transverse direction. The HydroWer Compensator is constructed of an inner liner of a reinforced high strength nitrile  rubber (Perbunan). The outer and inside layers are smooth and have an aerodynamic design that eliminates cavitation. Both ends have a vulcanized sealing surface, eliminating the need of additional seals. The maximum operating pressure is 115 psi from -4 °F to +176 °F.

Product Catalogs:

HydroWer Compensators 1
HydroWer Compensators 2

Aegi pipe clamps are suitable for clamping pipes, tubes, hoses and electric cables.  The Aegi clamp design is made for quick, easy installation and layout.  Aegi clamps are manufactured to DIN 3015 and are available in Standard, Heavy Duty and Twin series. The standard clamp body is of two identical half’s of Polypropylene (green color, -22°F to 194°F) material. Other materials on request: aluminum, rubber and polyamide. The metallic components of the clamps are manufactured in steel (stainless steel available upon request). The bolts of the clamps are manufactured in steel (stainless steel available upon request). We have a large inventory for same-day shipment!

Product Catalogs:

AEGI Pipe Clamps

The bkm serv-Clip is used to add a test point on an existing hydraulic circuit within minutes - even if the system is pressurized to 9100 psi (630 bar) and then carry out your measurements: pressure, flow rate, oil sample or connect a variety of measuring devices.

Watch the following videos for a demonstration of how the Serv-Clip is installed and utilized.

Product Videos:

servClip Type 1 Installation (Under Pressure)
servClip Type 2 Installation (Pressureless)
Pressure Sensor Installation
Temperature Sensor Installation
Flow Rate and Leakage Sensor Installation

Product Catalogs:

BKM Serv-Clip Instant Test Fitting Connection

Pressure is one of the most important diagnostic parameters in the hydraulic circuit.  Obtaining pressure readings is essential to successful preventive maintenance and troubleshooting. The Spradow test fittings allow the connection of a pressure gauge in only seconds while the equipment is running. It is the safest, cleanest and most convenient way of measuring pressure. Designing your equipment with the Spradow test fittings will improve the quality of your equipment and in today’s market, higher quality makes the equipment more attractive to potential buyers. The spring loaded check valve inside the test point opens during engagement of the special micro-bore hose fitting end. The connection can be performed under pressure without the use of tools. A single gauge connected to the high pressure micro-bore hose can check an unlimited number of test points. We also offer various types of hose assemblies for direct connection to the test fitting.

Product Catalogs:

Spradow Test Fittings