Hydraulic Pressure Intensifiers – MP-T-XP Series

The MP-T-XP Series hydraulic pressure intensifier is based on the MP-T and is identical to it, except that the MP-T-XP adds a dedicated radial G1/4” port for returning the flow from the high pressure side to tank. This ensures the oil from the high pressure side is returned for filtering and cooled before entering the intensifier circuit again. This is used frequently in small power packs and provides for more clean and cool oil flow through the intensifier and the connected tools by allowing the oil to circulate through the tank.  

Ratio Min. Inlet Flow Max. Inlet Flow Outlet Flow Q1 Outlet Flow Q2 Min. Supply Pressure Max. Supply Pressure Max. Output Pressure
(i) (GPM / LPM) (GPM / LPM) (GPM / LPM) (GPM / LPM) (PSI / BAR) (PSI / BAR) (PSI / BAR)
1.5  0.5 / 2 2.1 / 8 0.21 / 0.8 0.08 / 0.3 218 / 15 2,900 / 200 4,350 / 300
2  0.5 / 2 2.1 / 8 0.21 / 0.8 0.08 / 0.3  218 / 15 2,900 / 200 5,800 / 400
3.4  0.5 / 2 4 / 15 0.58 / 2.2 0.13 / 0.5  218 / 15 2,900 / 200 9,860 / 680
4  0.5 / 2 3.7 / 14 0.47 / 1.8 0.1 / 0.4  218 / 15 2,900 / 200 11,600 / 800
5  0.5 / 2 3.7 / 14 0.37 / 1.4 0.08 / 0.3  218 / 15 2,320 / 160 11,600 / 800
7. 0  0.5 / 2 3.4 / 13 0.29 / 1.1 0.05 / 0.2  218 / 15 1,653 / 114 11,600 / 800
9  0.5 / 2 3.4 / 13 0.19 / 0.7 0.03 / 0.1  218 / 15 1,290 / 89 11,600 / 800

  Weight: 2.86 lbs / 1.3 KG


Related Products

Pressure Intensifier – How to select

Since, we have decided we want to use a pressure intensifier to get that needed pressure to finish the job […]

read more
Pressure Intensifier – Troubleshooting

Most problems concerning the ScanWill Pressure Intensifiers are caused by the following 7 factors: 1: Contamination of the Fluid If […]

read more
Hydraulic Pressure Intensifiers – MPM-F Series

The MPM-F pressure intensifier is a made to meet the space requirements of a customer for hydraulic tongs in the […]

read more