Hydraulic Rubber Compensators
The HYTORC Rubber Compensator is a product that qualifies as one of the best kept secrets of power unit accessories. The compensators are flexible connectors with SAE or DIN flanges that correct pipe alignment problems. They also provide a benefit with damping of vibrations, noises and movements in axial and transverse direction.
The HYTORC Compensator is constructed of an inner liner of a reinforced high strength nitrile rubber (Perbunan). The outer and inside layers are smooth and have an aerodynamic design that eliminates cavitation. Both ends have a vulcanized sealing surface, eliminating the need of additional seals. The maximum operating pressure is 116 psi (6 bar) from -4 °F to +176 °F (-20ºC to 80ºC).
Technical & Material Data
|
Max. operating pressure |
87 psi (6 bar) |
|
Max. peak pressure |
116 psi (8 bar) |
|
Bursting pressure |
174 psi (12 bar) |
|
Under pressure |
10.2 psi (0.7 bar) |
|
Temperature range |
-4ºF to 176ºF (-20ºC to 80ºC) |
|
Material |
Aluminum Alloy; Galvanized Steel; Malleable Cast Iron, Galvanized |
|
Material |
Nitrile Rubber (NBR) (Perbunan) |
|
Range of applications |
All types of mineral oil products, crude oil, lubricants, coolants, grease, cold water, warm water up to 140ºF (60ºC), water-oil-emulsion, fuels with up to 30% aromatics content |
Ordering Code
K 16 S D – 80
The above example shows a compensator of a nominal width of 80mm with 1 SAE flange and 1 DIN flange.
Hytorc is a supplier and power unit accessory and valve manufacturer for various applications including construction, mechanical, marine, and industrial.
