Valve Block Flow Divider

This valve block flow divider is characterized by high synchronization accuracy even with different loads and low flows, small installation space, and low weight.

In addition, the circuit diagram can be kept simpler for end position compensation because the “suction function” required for rotary flow dividers can be omitted.

Please note that this accuracy solution is only suitable for rod side connected double-acting cylinders and, due to the valve technology, special attention must be paid to the cleanliness of the operating medium by using filters with 10 µm.

Flow from 2.5 to 12 lpm / 0.265 to 3.1 gpm
• Working pressure up to 210 bar / 3,000 psi
• Adjustable pressure relief valve
• All connections G3/8″ BSPP
• Anodized housing


Jahns is a supplier and flow divider manufacturer for various applications including construction, mechanical, technological, and industrial.

Related Products

Volumetric Flow Dividers

In comparison to rotating flow divider types Jahn’s MZB and MLH lines are working only by volume dosage and the […]

read more
Radial Piston Flow Dividers

MTL: 2 to 12 section divider. Available in 3 sizes. Flow Rate: 7 gal/min. to 66 gal/min per section. Working […]

read more
Hydraulic Gear Flow Dividers

Hydraulic Gear Flow Divider MTO (Aluminum Housing): 2 to 12 section divider. Flow Rate: 0.4 gal/min. to 16 gal/min per […]

read more