Skip to content

Rotary actuators for the refuse/waste and recycling container tipper market.

IC-Fluid Power, Inc. logo International Hydraulic Components

Rotary Actuators – IC40 Series

The IC40 series has a max drive torque of 24,780 – 59,290 in-lbs at 3,045 psi (2,800 – 6,700 Nm at 210 bar). Given its high bearings and precision accuracy, it is a solution for many applications that involve positioning, rotating devices, steering, and more. The IC40 series also achieves high performance for applications needing to consistently maintain high torque outputs. Additionally, the IC Series was designed with high shock absorption to preserve the product’s life. It is also suitable for rotating applications where a standard rotation of 200° or 220° is needed.

Hydraulic Rotary-Linear Actuator Standard Features:

  • Standard Rotation: 200° / 220°
  • Max Drive Torque: 24,780 – 59,290 in-lbs at 3,045 psi (2,800 – 6,700 Nm at 210 bar)
  • Max Holding Torque: 53,980 – 126,560 in-lbs at 3,045 psi (6,100 – 14,300 Nm at 210 bar)
  • Max Straddle Moment: 37,170 – 89,390 in-lbs (4,200 – 10,100 Nm)
  • Mounting: Foot
Drive Torque *
in-lbs (Nm)
24,780 (2,800)44,250 (5,000)59,290 (6,700)
Holding Torque *
in-lbs (Nm)
53,980 (6,100)93,810 (10,600)126,560 (14,300)
Standard Rotation220°220°200°
Max Straddle Moment *
in-lbs (Nm)
37,170 (4,200)67,260 (7,600)89,390 (10,100)
Radial Capacity
lbs (kg)
4,490 (2,040)6,900 (3,130)8,590 (3,900)
Axial Capacity
lbs (kg)
4,490 (2,040)6,900 (3,130)8,590 (3,900)
* in-lbs at 3,045 psi (Nm at 210 bar)

Straddle Mounting

Straddle mounting is ideal for loads needing support at both ends of the shaft. Similar to cantilever mounting, the top of the load is bolted to the shaft flange. Then, the bottom is bolted to the end cap flange.

Helical Spline Hydraulic Rotary Actuators

Our rotary actuators are the helical spline design. This means, a piston and a helix, or sliding spline, work together to convert the linear motion of the piston into rotational motion. Composed of two moving parts and some form of housing, the sliding helical splined gear concept within the actuator is used in many applications where a rotary movement is required. Helical Spline Actuators function when the piston is axially displaced using hydraulic pressure causing simultaneous rotation of the piston. Standard amounts of rotation are 200° and 220°. The primary benefit to this type product compared to alternative designs such as linkages using hydraulic cylinders (linear actuators) is its compact design.

Code Guide:

1SeriesIC40 Series
2Torque (output Torque/100) in Nm 28, 50, 67
3Angle (other angles available)200°, 220°
4OutputH spindle
5MountQ front flange
6Counterbalance ValveY with valve
W without valve
7Thread PatternBLANK metric
E imperial

IC-Fluid Power, Inc. supports many applications including energy, marine & offshore, mining, packaging, plastic & injection molding, and more. 

Related Products