Hydraulic Pressure Intensifiers – MP-S Series

The MP-S series is the smallest range of the Scanwill Pressure intensifier range, and is designed for compact applications where the space available is limited, e.g. for pallets on machine tools. The MP-S series is designed for inlet flows from 0.5 to 2 GPM / 2 to 8 LPM and is available with multiple ratios ranging from 2.0 to 9.0 and will increase a supplied pressure (145 to 2,900 psi / 10 to 200 bar) to a required end pressure (1,000 to 11,500 psi / 70 to 800 bar. The end pressure is dependent on the ratio and is always proportional with the supplied pressure. Integrated in the MP-S intensifier is a pilot operated check valve, which allows the high pressure side to be evacuated back to tank through the intensifier. The MP-S series is available in cast iron for industrial applications, and in a Stainless Steel version for marine and offshore applications.

Weight: 1.54  lbs / 0.7 KG

P & T Connections: G1/8″ HP connection: G1/4″ Ordering Code* Example: MP-T-S with POV, intensification 5.0 and BSP connections: MP-T-S-P-5.0-G   *First decide whether the pilot operated check valve, POV, is required, then decide the intensification ratio (i), and finally decide the connections (BSP or UNF). 

ScanWill is a supplier and pressure intensifier manufacturer for various applications including construction, mechanical, marine, and industrial.