Skip to content

HYDRAULIC PRESSURE INTENSIFIERS – MP-C SERIES

Home / Products / Pressure Intensifiers / Reciprocating Type / Hydraulic Pressure Intensifiers – MP-C Series
Request a Price Quote

LOW/MEDIUM PRESSURE

Hydraulic Pressure Intensifiers – MP-C Series

The MP-C Series is a pressure intensifier specifically designed for Cetop/NG6 mounting.

Key Features of the MP-C:

  • Cetop/NG6 pressure intensifier, reciprocating type for continuous flow

MP-C Configurations:

  • Hydraulic stacking system applications (MP-CT): The MP-CT Series intensifier is made for installation in hydraulic stacking systems, where a higher end pressure is required for a specific job. Higher pressure is suppled through a separate female port G1/4″. The supply circuit will not be affected by the higher pressure and will not have influence on other functions in the chain. Using the MP-CT in a hydraulic system offers the advantage, that the system pressure can be kept as low as possible, as any higher pressure can be obtained where needed. This way pressure reduction in the whole system and energy wasting can be avoided.
  • No change of pressure in A & B ports, separate port for high pressure
  • Main difference between MP-C and MP-CT is the CT’s external port for the intensified pressure, typically utilized for cases where intensified pressure exceeds the rating of the Cetop DO3/NG6 mounting interface

Technical Data:

  • Inlet Flow: up to 4 gpm (15 lpm)
  • Supply pressure: up to 2,900 psi (200 bar). The supply circuit will not be affected by the higher pressure and will not have influence on other functions in the chain. 
  • End pressure rating:
  • MP-C: 290 – 7,250 psi (20 – 500 bar)
  • MP-CT: 290 – 11,600 psi (20 – 800 bar)
  • The end pressure is dependent on the ratio and is always proportional with the supplied pressure.
  • Multiple intensification ratios
  • Integrated high pressure valves, including pilot operated check valve (POV):
  • MP-C: Allows the high-pressure side to be evacuated back to tank through the intensifier
  • MP-CT: Operated by a directional valve on the supply side and will activate the high-pressure side to tank
  • Weight:
  • MP-C: 5.94 lbs (2.7 kg)
  • MP-CT: 5.28 lbs (2.4 kg)

Intensification Ratio Chart (MP-C):

RatioMin. Inlet FlowMax. Inlet flowOutlet Flow Q1Outlet Flow Q2Min. Inlet PressureMax. Supply PressureMax. Output Pressure
(i)(GPM / LPM)(GPM / LPM)(GPM / LPM)(GPM / LPM)(psi / bar)(psi / bar)(psi / bar)
1.50.5 / 22.1 / 80.21 / 0.80.08 / 0.3218 / 152,900 / 2004,350 / 300
20.5 / 22.1 / 80.21 / 0.80.05 / 0.2218 / 152,900 / 2005,800 / 400
3.40.5 / 215-Apr0.58 / 2.20.13 / 0.5218 / 152,132 / 1477,250 / 500
40.5 / 23.7 / 140.47 / 1.80.1 / 0.4218 / 151, 812 / 1257,250 / 500
50.5 / 23.7 / 140.37 / 1.40.08 / 0.3218 / 151,450 / 1007,250 / 500
7. 00.5 / 23.4 / 130.29 / 1.10.05 / 0.2218 / 151,036 / 717,250 / 500
90.5 / 23.4 / 130.19 / 0.70.03 / 0.1218 / 15806 / 567,250 / 500

ScanWill is a supplier and pressure intensifier manufacturer for various applications including construction, mechanical, marine, and industrial.

Related Products