POWER UNIT PRODUCTS & VALVES
Hydraulic power units (HPUs) provide pressurized flow to a hydraulic system compromising hydraulic motors, actuators, cylinders and other hydraulic components. Performance specifications and physical characteristics are important parameters to consider when building hydraulic power units. IC-Fluid Power specializes in control valves for very high pressures up to 2,000 bar / 29,000 psi. Below is a listing of products from IC-Fluid Power to complement your power unit.
BROWSE BY CATEGORY
Power Unit Products & Valves
Power Unit Products & Valves — Shut Off Valves
These low-pressure Shut Off Valves are typically used on hydraulic reservoirs so that the reservoir does not need to be drained when maintenance is performed on the system.
Power Unit Products & Valves — 10,000 PSI Manual Valves
10,000 psi (700 bar) Manual Valves are suitable for single and double acting hydraulic systems.
Power Unit Products & Valves — Rubber Compensators
Rubber Compensators are flexible connectors with SAE or DIN flanges that help correct pipe alignment issues and ease system maintenance.
Power Unit Products & Valves — 10,000 PSI Relief Valves DBE and DBG
10,000 psi Relief Valves are available as a cartridge for use in control blocks and as a block mounted valve.
Power Unit Products & Valves — 10,000 PSI Directional Control Valve
10,000 psi Relief Valves are available as a cartridge for use in control blocks and as a block mounted valve.
Power Unit Products & Valves — Check Valves
Check Valves block an oil flow in one direction and allow it in the other direction. A check valve is a type of shutoff valve.