Skip to content

HYDRAULIC PRESSURE INTENSIFIERS – MP-I SERIES

Home / Products / Pressure Intensifiers / Reciprocating Type / Hydraulic Pressure Intensifiers – MP-I Series
Request a Price Quote

LOW/MEDIUM PRESSURE

Hydraulic Pressure Intensifiers – MP-I Series

The MP-I Series is a hydraulic pressure intensifier designed as a screw-in component for hydraulic manifolds.

Key Features of the MP-I:

  • Reciprocating type for continuous flow as pressure builds
  • No tubing required
  • Generates higher pressure only in defined areas of the manifold
  • Other manifold components do not need to be pressure rated above pump pressure

Technical Data:

  • Inlet Flow: 4 gpm (15 lpm)
  • Supply pressure: 2,900 psi (200 bar)
  • End pressure rating: 7,250 psi (500 bar). The end pressure is dependent on the ratio and is always proportional with the supplied pressure.
  • Multiple intensification ratios
  • All high-pressure valves are integrated
  • Weight: 1.54 lbs (0.7 kg)

ScanWill is a supplier and pressure intensifier manufacturer for various applications including construction, mechanical, marine, and industrial.

Related Products

HYDRAULIC PRESSURE INTENSIFIERS – ACCESSORIES

Home / Products / Pressure Intensifiers / Reciprocating Type / Hydraulic Pressure Intensifiers — Accessories
Request a Price Quote

Hydraulic Pressure Intensifiers – Accessories

Mounting kits, hardware, accessories, and filters are available to ensure seamless installation of pressure intensifiers.

Mounting nut (M-Nut)

The M-Nut is a M28 x 1.5 Nut used for mounting the MP-T pressure intensifier.

Mounting kit (M-Kit)

The M-Kit consists of two mounting brackets, used to fasten the intensifier to a base plate.

Connection kit

Connection Kits are available for mounting the intensifiers directly to a hydraulic block. The P and T connection is then supplied directly through the Connection Kit, eliminating the need for tubing.

Cetop D03 / NG06 top plate

The Cetop D03 / NG06 top plate is for closing the top of the MP-C intensifier.

High pressure fittings

Inlet Flow: up to 21.2 gpm (80 lpm)

High pressure filters

In-line Filters grant a high protection to the most delicate components in a hydraulic system.

ScanWill is a supplier and pressure intensifier manufacturer for various applications including construction, mechanical, marine, and industrial.

Related Products

HYDRAULIC PRESSURE INTENSIFIERS – MP-S SERIES

Home / Products / Pressure Intensifiers / Reciprocating Type / Hydraulic Pressure Intensifiers — MP-S Series
Request a Price Quote

LOW/MEDIUM PRESSURE

Hydraulic Pressure Intensifiers – MP-S Series

The MP-S series is the smallest range of the Scanwill Pressure intensifier range, designed for compact applications with limited space, such as pallets on machine tools.

Key Features of the MP-S:

  • In-line pressure intensifier, reciprocating type for continuous flow
  • Small, compact applications

Technical Data:

  • Inlet Flow: 0.5-2 gpm (2-8 lpm)
  • Supply pressure: 145-2,900 psi (10-200 bar)
  • End pressure rating: 1,000-11,600 psi (70 to 800 bar). The end pressure is dependent on the ratio and is always proportional with the supplied pressure.
  • 8 intensification ratios
  • Integrated pilot-operated check valve: This allows the high-pressure side to be evacuated back to tank through the intensifier.
  • Material: The MP-S series is available in cast iron for industrial applications, and in a stainless-steel version for marine and offshore applications.
  • Weight: 1.54 lbs (0.7 kg)
  • Connections:
  • P & T Connections: G1/8”
  • HP connection: G1/4″

Ordering Code Example:

First decide whether the pilot operated check valve, POV, is required, then decide the intensification ratio (i), and finally decide the connections (BSP or UNF).

Example: MP-T-S with POV, intensification 5.0 and BSP connections: MP-T-S-P-5.0-G 

Intensification Ratio Chart:

RatioMin. Inlet FlowMax. Inlet FlowOutlet Flow Q1Outlet Flow Q2Min. Supply PressureMax. Supply PressureMax. Output Pressure
(i)(GPM / LPM)(GPM / LPM)(GPM / LPM)(GPM / LPM)(PSI / BAR)(PSI / BAR)(PSI / BAR)
1.50.5 / 22.1 / 80.21 / 0.80.08 / 0.3 218 / 152,900 / 2004,350 / 300
20.5 / 22.1 / 80.21 / 0.80.08 / 0.3 218 / 152,900 / 2005,800 / 400
3.40.5 / 24 / 150.58 / 2.20.13 / 0.5 218 / 152,900 / 2009,860 / 680
40.5 / 23.7 / 140.47 / 1.80.1 / 0.4 218 / 152,900 / 20011,600 / 800
50.5 / 23.7 / 140.37 / 1.40.08 / 0.3 218 / 152,320 / 16011,600 / 800
7. 00.5 / 23.4 / 130.29 / 1.10.05 / 0.2 218 / 151,653 / 11411,600 / 800
90.5 / 23.4 / 130.19 / 0.70.03 / 0.1 218 / 151,290 / 8911,600 / 800

ScanWill is a supplier and pressure intensifier manufacturer for various applications including construction, mechanical, marine, and industrial.

Related Products

HYDRAULIC PRESSURE INTENSIFIERS – MPL SERIES

Home / Products / Pressure Intensifiers / Reciprocating Type / Hydraulic Pressure Intensifiers – MPL Series
Request a Price Quote

HIGH PRESSURE

Hydraulic Pressure Intensifiers – MPL Series

The MPL Series includes three models— MPL 1400, MPL 2000, and MPL 4000, all designed for continuous flow in high pressure applications.

Key Features of the MPL Series:

  • In-line reciprocating pressure intensifiers for uninterrupted flow
  • High pressure and flow applications
  • Optional top plates are available for high pressure connections

MPL Series Models:

  • High Pressure and Flow (MPL-1400): The MPL 1400 is ideal for high-flow, high-pressure operations. This intensifier has a flow rate up to 13.2 gpm (50 lpm) and output pressure up to 20,300 psi (1,400 bar).
  • Second Highest Pressure (MPL-2000): The MPL 2000 is designed for high-pressure power packs with an output pressure up to 40,600 psi (2,800 bar).
  • Highest Pressure (MPL-4000): The MPL 4000 is perfect for applications requiring maximum pressure performance. This model has the highest pressure in the series with pressure up to 58,000 psi (4,000 bar).

Technical Data:

  • Inlet Flow:
  • MPL-1400: up to 13.2 gpm (50 lpm)
  • MPL-2000 and MPL-4000: up to 7.9 gpm (30 lpm)
  • Supply pressure: 3,000 psi (200 bar)
  • End pressure rating: The end pressure is dependent on the ratio and is always proportional with the supplied pressure.
  • MPL-1400: 20,300 psi (1,400 bar)
  • MPL-2000: 40,600 psi (2,800 bar)
  • MPL-4000: 58,000 psi (4,000 bar)
  • Multiple intensification ratios
  • All high-pressure valves are integrated
  • Weight: 19.8 lbs (9 kg)

Intensification Ratio Charts:

MPLRatioMax. Inlet flowMax. Supply PressureMax. Output Pressure
(i)(GPM / LPM)(psi / bar)(psi / bar)
14007.015.8 / 60.02,900 / 20020,300 / 1,400
200010.013.2 / 50.02,900 / 20029,000 / 2,000
200014.013.2 / 50.02,900 / 20040,600 / 2,800
400020.07.9 / 30.02,900 / 20058,000 / 4,000

ScanWill is a supplier and pressure intensifier manufacturer for various applications including construction, mechanical, marine, and industrial.

Related Products

HYDRAULIC PRESSURE INTENSIFIERS – MP-L SERIES

Home / Products / Pressure Intensifiers / Reciprocating Type / Hydraulic Pressure Intensifiers – MP-L Series
Request a Price Quote

LOW/MEDIUM PRESSURE

Hydraulic Pressure Intensifiers – MP-L Series

The MP-L Series is an in-line pressure intensifier designed for large hydraulic systems and features the highest inlet flow rating in the MP Series.

Key Features of the MP-L:

  • In-line pressure intensifier, reciprocating type for continuous flow
  • High flow applications

Technical Data:

  • Inlet Flow: up to 21.2 gpm (80 lpm)
  • Supply pressure: up to 2,900 psi (200 bar)
  • End pressure rating: 290 – 11,600 psi (20 – 800 bar). The end pressure is dependent on the ratio and is always proportional with the supplied pressure.
  • 6 intensification ratios
  • High pressure valves integrated including a pilot-operated check valve.
  • Weight: 19.8 lbs (9 kg)

Intensification Ratio Chart:

RatioMin. Inlet FlowMax. Inlet flowOutlet Flow Q1Outlet Flow Q2Min. Inlet PressureMax. Supply PressureMax. Output Pressure
(i)(GPM / LPM)(GPM / LPM)(GPM / LPM)(GPM / LPM)(psi / bar)(psi / bar)(psi / bar)
215 / 413.22 / 501.32 / 50.52 / 2218 / 152,900 / 2005,800 / 400
3.415 / 421.16 / 804.71 / 17.83.44 / 13218 / 152,900 / 2009,860 / 680
415 / 421.16 / 803.89 / 14.72.91 / 11218 / 152,900 / 20011,600 / 800
515 / 421.16 / 803.06 / 11.62.33 / 8218 / 152,900 / 20011,600 / 800
7. 015 / 421.16 / 802.22 / 8.41.67 / 6.3218 / 151,653 / 11411,600 / 800

ScanWill is a supplier and pressure intensifier manufacturer for various applications including construction, mechanical, marine, and industrial.

Related Products

HYDRAULIC PRESSURE INTENSIFIERS – MP-2000 SERIES

Home / Products / Pressure Intensifiers / Reciprocating Type / Hydraulic Pressure Intensifiers – MP-2000 Series
Request a Price Quote

HIGH PRESSURE

Hydraulic Pressure Intensifiers – MP-2000 Series

The MP-2000 is an in-line pressure intensifier designed to be positioned in a low-pressure hydraulic system and will provide higher pressure exactly where needed (max. 2.000 bar). Having all the required high-pressure valves incorporated, the need for additional high-pressure components is minimized ensuring a cost-effective system. Controlling the high-pressure side is achieved by valves on the low-pressure side through the intensifier adding to safety. The intensifiers are offered with 4 different intensification ratios to meet most intensification requirements. The compact design ensures easy installation in new as well as existing hydraulic circuits. The MP-2000 is offered with a pilot operated check valve (POV) integrated, which allows the high-pressure side to be relieved through the intensifier. 

Key Features of the MP-2000:

  • In-line pressure intensifier, reciprocating type for continuous flow
  • Medium-high pressure and medium flow rate applications
  • Optional top plates are available for high pressure connections

MP-2000 Configurations:

  • MP-2000-XP: The MP-2000-XP is made for installation in smaller power packs, where a higher end pressure is required, for example, a bolt tensioner. It is designed for smaller high-pressure power packs up to 2,600 bar/37,700 psi. This model also features an extra HP port for gauge mounting.

    When the XP-intensifier is connected to P and T, it will automatically increase the supplied pressure proportionally to the required end pressure. For evacuation of the high-pressure side, a pilot operated check valve is integrated, and when activated, the flow from the high-pressure side is led through a separate side port directly to tank, where it will be cooled and filtered before being pumped back in the hydraulic circuit. 
  • MP-2100: The MP-2100 supports a higher maximum inlet flow up to 4 gpm (15 lpm) compared to the MP-2000’s 3.4 gpm (13 lpm), making it ideal for applications requiring greater flow efficiency.

Technical Data:

  • Inlet Flow:
  • MP-2000 and MP-2000-XP: up to 3.4 gpm (13 lpm)
  • MP-2100: up to 4 gpm (15 lpm)
  • Supply pressure: up to 2,900 psi (200 bar)
  • End pressure rating:
  • MP-2000: up to 43,500 psi (3,000 bar)
  • MP-2000-XP: up to 37,700 psi (2,600 bar)
  • MP-2100: up to 46,400 psi (3,200 bar).
  • Multiple intensification ratios
  • All high-pressure valves are integrated
  • Weight: 5.94 lbs (2.7 kg)

Intensification Ratio Charts:

RatioMin. Inlet FlowMax. Inlet flowOutlet Flow Q1Outlet Flow Q2Min. Inlet PressureMax. Supply PressureMax. Output Pressure
(i)(GPM / LPM)(GPM / LPM)(GPM / LPM)(GPM / LPM)(psi / bar)(psi / bar)(psi / bar)
1.81.9 / 76.6 / 251.32 / 50.39 / 1.5218 / 152,900 / 2005,220 / 360
3.41.9 / 79.3 / 3550.74 / 2.8218 / 152,900 / 2009,860 / 680
41.9 / 79.3 / 351.06 / 40.63 / 2.4218 / 152,900 / 20011,600 / 800
51.9 / 79.3 / 350.93 / 3.50.5 / 1.9218 / 152,030 / 16011,600 / 800
7. 01.9 / 79.3 / 350.8 / 30.34 / 1.3218 / 151,450 / 11411,600 / 800
RatioMin. Inlet FlowMax. Inlet flowOutlet Flow Q1Outlet Flow Q2Min. Inlet PressureMax. Supply PressureMax. Output Pressure
(i)(GPM / LPM)(GPM / LPM)(GPM / LPM)(GPM / LPM)(psi / bar)(psi / bar)(psi / bar)
7.00.5 / 23.4 / 130.29 / 1.10.05 / 0.2218 / 152,900 / 20020,300 / 1,400
10.00.5 / 23.4 / 130.18 / 0.070.05 / 0.2218 / 152,900 / 20029,000 / 2,000
13.00.5 / 23.4 / 130.13 / 0.050.02 / 0.1218 / 152,900 / 20037,700 / 2,600
RatioMax. Inlet FlowMax. Supply PressureMax. Output Pressure
(i)(GPM / LPM)(psi / bar)(psi / bar)
7.04.0 / 15.02,900 / 20020,300 / 1,400
10.04.0 / 15.02,900 / 20029,000 / 2,000
13.03.7 / 14.02,900 / 20037,700 / 2,600
16.03.2 / 12.02,900 / 18846,400 / 3,200

ScanWill is a supplier and pressure intensifier manufacturer for various applications including construction, mechanical, marine, and industrial.

Related Products

HYDRAULIC PRESSURE INTENSIFIERS – MP-M SERIES

Home / Products / Pressure Intensifiers / Reciprocating Type / Hydraulic Pressure Intensifiers – MP-M Series
Request a Price Quote

LOW/MEDIUM PRESSURE

Hydraulic Pressure Intensifiers – MP-M Series

The MP-M is an in-line hydraulic intensifier for medium size hydraulic systems.

Key Features of the MP-M:

  • In-line pressure intensifier, reciprocating type for continuous flow

MP-M Configurations:

  • Safety valve applications (MPM-350): The MPM-350 is an in-line hydraulic intensifier designed to increase a supplied pump pressure to a higher end pressure (for fluids only). This intensifier is capable of a maximum supply pressure of 350 bar (5,075 psi), as opposed to the MP-M which has a maximum supply pressure of 200 bar (2,900 psi). This can be used for applications where the intensifier is used as a safety valve for closing wells on land.
  • Hydraulic tongs applications (MPM-F): The MPM-F pressure intensifier is a made to meet the space requirements of a customer for hydraulic tongs in the offshore industry. This series can be used in custom applications as well.

Technical Data:

  • Inlet Flow:
  • MP-M: up to 6.6 gpm (35 lpm)
  • MPM-350: up to 6.6 gpm (25 lpm)
  • Supply pressure:
  • MP-M: up to 2,900 psi (200 bar)
  • MPM-350: up to 5,075 psi (350 bar)
  • End pressure rating:
  • MP-M: 290-11,600 psi (20-800 bar)
  • MPM-350: 7,250-15,225 psi (500-1,050 bar)
  • Multiple intensification ratios
  • High pressure valves integrated including a pilot-operated check valve
  • Weight: MP-M: 7.7 lbs (3.5 kg)

Intensification Ratio Chart (MP-M):

RatioMin. Inlet FlowMax. Inlet flowOutlet Flow Q1Outlet Flow Q2Min. Inlet PressureMax. Supply PressureMax. Output Pressure
(i)(GPM / LPM)(GPM / LPM)(GPM / LPM)(GPM / LPM)(psi / bar)(psi / bar)(psi / bar)
1.81.9 / 76.6 / 251.32 / 50.39 / 1.5218 / 152,900 / 2005,220 / 360
3.41.9 / 79.3 / 3550.74 / 2.8218 / 152,900 / 2009,860 / 680
41.9 / 79.3 / 351.06 / 40.63 / 2.4218 / 152,900 / 20011,600 / 800
51.9 / 79.3 / 350.93 / 3.50.5 / 1.9218 / 152,030 / 16011,600 / 800
7. 01.9 / 79.3 / 350.8 / 30.34 / 1.3218 / 151,450 / 11411,600 / 800

ScanWill is a supplier and pressure intensifier manufacturer for various applications including construction, mechanical, marine, and industrial.

Related Products

HYDRAULIC PRESSURE INTENSIFIERS – MP-C SERIES

Home / Products / Pressure Intensifiers / Reciprocating Type / Hydraulic Pressure Intensifiers – MP-C Series
Request a Price Quote

LOW/MEDIUM PRESSURE

Hydraulic Pressure Intensifiers – MP-C Series

The MP-C Series is a pressure intensifier specifically designed for Cetop/NG6 mounting.

Key Features of the MP-C:

  • Cetop/NG6 pressure intensifier, reciprocating type for continuous flow

MP-C Configurations:

  • Hydraulic stacking system applications (MP-CT): The MP-CT Series intensifier is made for installation in hydraulic stacking systems, where a higher end pressure is required for a specific job. Higher pressure is suppled through a separate female port G1/4″. The supply circuit will not be affected by the higher pressure and will not have influence on other functions in the chain. Using the MP-CT in a hydraulic system offers the advantage, that the system pressure can be kept as low as possible, as any higher pressure can be obtained where needed. This way pressure reduction in the whole system and energy wasting can be avoided.
  • No change of pressure in A & B ports, separate port for high pressure
  • Main difference between MP-C and MP-CT is the CT’s external port for the intensified pressure, typically utilized for cases where intensified pressure exceeds the rating of the Cetop DO3/NG6 mounting interface

Technical Data:

  • Inlet Flow: up to 4 gpm (15 lpm)
  • Supply pressure: up to 2,900 psi (200 bar). The supply circuit will not be affected by the higher pressure and will not have influence on other functions in the chain. 
  • End pressure rating:
  • MP-C: 290 – 7,250 psi (20 – 500 bar)
  • MP-CT: 290 – 11,600 psi (20 – 800 bar)
  • The end pressure is dependent on the ratio and is always proportional with the supplied pressure.
  • Multiple intensification ratios
  • Integrated high pressure valves, including pilot operated check valve (POV):
  • MP-C: Allows the high-pressure side to be evacuated back to tank through the intensifier
  • MP-CT: Operated by a directional valve on the supply side and will activate the high-pressure side to tank
  • Weight:
  • MP-C: 5.94 lbs (2.7 kg)
  • MP-CT: 5.28 lbs (2.4 kg)

Intensification Ratio Chart (MP-C):

RatioMin. Inlet FlowMax. Inlet flowOutlet Flow Q1Outlet Flow Q2Min. Inlet PressureMax. Supply PressureMax. Output Pressure
(i)(GPM / LPM)(GPM / LPM)(GPM / LPM)(GPM / LPM)(psi / bar)(psi / bar)(psi / bar)
1.50.5 / 22.1 / 80.21 / 0.80.08 / 0.3218 / 152,900 / 2004,350 / 300
20.5 / 22.1 / 80.21 / 0.80.05 / 0.2218 / 152,900 / 2005,800 / 400
3.40.5 / 215-Apr0.58 / 2.20.13 / 0.5218 / 152,132 / 1477,250 / 500
40.5 / 23.7 / 140.47 / 1.80.1 / 0.4218 / 151, 812 / 1257,250 / 500
50.5 / 23.7 / 140.37 / 1.40.08 / 0.3218 / 151,450 / 1007,250 / 500
7. 00.5 / 23.4 / 130.29 / 1.10.05 / 0.2218 / 151,036 / 717,250 / 500
90.5 / 23.4 / 130.19 / 0.70.03 / 0.1218 / 15806 / 567,250 / 500

ScanWill is a supplier and pressure intensifier manufacturer for various applications including construction, mechanical, marine, and industrial.

Related Products

HYDRAULIC PRESSURE INTENSIFIERS – MP-F SERIES

Home / Products / Pressure Intensifiers / Reciprocating Type / Hydraulic Pressure Intensifiers – MP-F Series
Request a Price Quote

LOW/MEDIUM PRESSURE

Hydraulic Pressure Intensifiers – MP-F Series

The MP-F Series is a hydraulic pressure intensifier designed for flange-on mounting.

Key Features of the MP-F:

  • Flange-on intensifier, reciprocating type for uninterrupted flow during pressure build-up

Technical Data:

  • Inlet Flow: up to 4 gpm (15 lpm)
  • Supply pressure: 2,900 psi (200 bar)
  • End pressure rating: 290 – 10,150 psi (20 – 700 bar). The end pressure is dependent on the ratio and is always proportional with the supplied pressure.
  • Multiple intensification ratios
  • Integrated high-pressure valves including a pilot-operated check valve: This allows the high-pressure side to be evacuated back to tank through the intensifier.
  • Weight: 3.1 lbs (1.4 kg)

Intensification Ratio Chart:

RatioMin. Inlet FlowMax. Inlet flowOutlet Flow Q1Outlet Flow Q2Min. Inlet PressureMax. Supply PressureMax. Output Pressure
(i)(GPM / LPM)(GPM / LPM)(GPM / LPM)(GPM / LPM)(psi / bar)(psi / bar)(psi / bar)
20.5 / 22.1 / 80.21 / 0.80.08 / 0.2218 / 152,900 / 2005,800 / 400
3.40.5 / 24 / 150.58 / 2.20.13 / 0.5218 / 152,900 / 2009,860 / 680
40.5 / 23.7 / 140.47 / 1.80.1 / 0.4218 / 152,538 / 17510,150 / 700
50.5 / 23.7 / 140.37 / 1.40.08 / 0.3218 / 152,030 / 14010,150 / 700
7. 00.5 / 23.4 / 130.29 / 1.10.05 / 0.2218 / 151,450 / 10010,150 / 700

ScanWill is a supplier and pressure intensifier manufacturer for various applications including construction, mechanical, marine, and industrial.

Related Products

HYDRAULIC PRESSURE INTENSIFIERS – MP-T SERIES

Home / Products / Pressure Intensifiers / Reciprocating Type / Hydraulic Pressure Intensifiers – MP-T Series
Request a Price Quote

LOW/MEDIUM PRESSURE

Hydraulic Pressure Intensifiers – MP-T Series

The MP-T Series is an in-line pressure intensifier designed to be positioned in a low-pressure hydraulic system and will provide higher pressure exactly where needed (max. 11,600 psi / 800 bar). Having all the required high-pressure valves incorporated, the need for additional high-pressure components is minimized ensuring a cost-effective system. Control of the high-pressure side is achieved by valves on the low-pressure side through the intensifier which adds to safety. The intensifiers are offered with 7 different intensification ratios as standard with additional ratios on request to meet most intensification requirements. The compact design ensures easy installation in new as well as existing hydraulic circuits.

Key Features of the MP-T:

  • All round, in-line pressure intensifier, reciprocating type for continuous flow
  • Most common model in the MP-Series

MP-T Configurations:

  • Rotating Applications (MP-T-R): The MP-T series of hydraulic pressure intensifiers is ideal for making specials, to meet the market demands. The MP-T-R pressure intensifier is based on the MP-T series, but modified to be inserted in a rotating application, where it rotates at 1,500 rpm, while intensifying a supplied pressure of 435 – 3,000 psi (30 – 210 bar).
  • Small Power Pack Applications (MP-T-XP): The MP-T-XP Series hydraulic pressure intensifier is based on the MP-T and is identical to it, except that the MP-T-XP adds a dedicated radial G1/4” port for returning the flow from the high-pressure side to tank. This ensures the oil from the high-pressure side is returned for filtering and cooled before entering the intensifier circuit again. This is used frequently in small power packs and provides for more clean and cool oil flow through the intensifier and the connected tools by allowing the oil to circulate through the tank. 

Technical Data:

  • Inlet Flow: 4 gpm (15 lpm)
  • Supply pressure: up to 2,900 psi (200 bar)
  • End pressure rating: 290 – 11,600 psi (20 – 800 bar). The end pressure is dependent on the ratio and is always proportional with the supplied pressure.
  • 8 intensification ratios
  • High pressure valves integrated
  • Optional built in POV valve
  • Weight: 2.86 lbs (1.3 kg)

Ordering Code Example:

First decide whether the pilot operated check valve, POV, is required, then decide the intensification ratio (i), and finally decide the connections (BSPP or UNF).

Example: MP-T with POV, intensification 5.0 and BSPP connections: MP-T-S-P-5.0-G 

Intensification Ratio Chart (MP-T):

RatioMin. Inlet FlowMax. Inlet FlowOutlet Flow Q1Outlet Flow Q2Min. Supply PressureMax. Supply PressureMax. Output Pressure
(i)(GPM / LPM)(GPM / LPM)(GPM / LPM)(GPM / LPM)(PSI / BAR)(PSI / BAR)(PSI / BAR)
1.5 0.5 / 22.1 / 80.21 / 0.80.08 / 0.3218 / 152,900 / 2004,350 / 300
2 0.5 / 22.1 / 80.21 / 0.80.08 / 0.3 218 / 152,900 / 2005,800 / 400
3.4 0.5 / 24 / 150.58 / 2.20.13 / 0.5 218 / 152,900 / 2009,860 / 680
4 0.5 / 23.7 / 140.47 / 1.80.1 / 0.4 218 / 152,900 / 20011,600 / 800
5 0.5 / 23.7 / 140.37 / 1.40.08 / 0.3 218 / 152,320 / 16011,600 / 800
7. 0 0.5 / 23.4 / 130.29 / 1.10.05 / 0.2 218 / 151,653 / 11411,600 / 800
9 0.5 / 23.4 / 130.19 / 0.70.03 / 0.1 218 / 151,290 / 8911,600 / 800

ScanWill is a supplier and pressure intensifier manufacturer for various applications including construction, mechanical, marine, and industrial.

Related Products